Black die-cast supports w/wood handle. Mounting posts come finished in black colored paint and the wooden pull handle comes finished in a clear finish. Can be installed on doors with mounting hole centers ranging from 6-1/2 to 6-5/8 in center-2-center. Surface-mounted. Features a sturdy metal backer support behind the wood. Note: Color of wood may vary per shipment.

The OOK? hardwall hanger is a favorite for hanging light projects on surfaces such as brick or concrete where regular nails are not adequate.

Prime-Line 3/4 in x 5/16 in plastic corner for window screen panels are designed to fit into square-cut ends of 5/16 aluminum screen frame material to repair or construct new aluminum-framed screens. Square-cut assembly eliminates the need for miter cutting providing for an easier frame construction by the homeowner.

Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in.

Fluted edging protects and improves the appearance of stair edges. 1/8 in H.

When subjected to 312 hrs of salt fog spray testing (BHMA A138.18), zinc-plated hardware showed severe corrosion while hardware with Weather Guard? protection withstood these harsh conditions with very little deterioration.

ITW Ramset powder loads and tools match tolerances to provide optimum power within recognized national velocity standards. Power level is designated by the load level number marked on each box, also by the color of the box and each powder load, as the number increases, the power level increases.

Removable interlocking fasteners with Command? adhesive hold firmly where placed. Fasteners can be separated and reattached. When removed, they come off cleanly without surface damage. Each set holds up to 3 lb with 3 sets per pack.

A premium quality back support belt with an 8 in wide, heavy-duty back panel and internal stays for extra support.

PRO-SOURCE FRAME HANGER ZINC

All-profile for extra large gaps or D-profile for large gaps. Designed specifically for marine and automotive use. Self-adhesive application. Remains flexible and unaffected by weather, will not absorb moisture or freeze.

For hanging plants and lamps.

Door and window high density, self-adhesive weatherproofing tape. Tough sponge rubber ensures long-lasting seal. Can be trimmed to fit application.

Medium-duty, precision slides for box drawer or pedestal file drawers up to 24 in wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 lb. Height of 1-13/16 in, required clearance of 1/2 in plus 1/32 in minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32 mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.

ProSource Rust-Resistant Cup Hook, Solid Brass, Brass Plated